Wednesday 11th, January, 2023
- Fit Bow Spit Board
install bow spit board with new forward bolts and rubber gaskets on forward sections
Fit Forestay
Tension Forestay
Bow spit board 
Bow spit board and forestay fitted Sailing Yacht Caree
Bow spit board
Bow spit board and forestay fitted
Sunday 08th, January, 2023
- Bow Spit Board Fitment
Apply butyl rubber to all surrounds of holes.
Place and waterproof fore spacer on bow spit.
Fit bow spit board
Insert for bolts. - Failure to line up.
Will remove spacers and butyl rubber and use rubber gaskets. - Dodger paint removal
Continue with scraping and sanding paint form the dodger
Saturday 07th, January, 2023
- Redrill and mount shower bilge
Redrill the shower bilge / anchor locker and V Berth drain shelf into area with epoxy through holes.
Trial mount shower bilge.
Shower Bilge 
Shower Bilge Sailing Yacht Caree
Shower Bilge
Shower Bilge
- New Bolts for Fore Stay Bracket
Make new bolts for Fore Stay bracket. 10mm Stainless Steel.
Forestay Bolts Sailing Yacht Caree
Forestay Bolts
Friday 06th, January, 2023
- Put a coat of flow coat on shower bilge shelf
Drill holes for alignment screws, then drill larger and fill with epoxy to waterproof.
Put final coat of flow coat on shower / anchor locker / V Berth locker bilge shelf.
Before Flow coat 
After Flow Coat Sailing Yacht Caree
Before Flow coat
After Flow Coat
Thursday 05th, January, 2023
- Dive on propeller to check anode
Dive on propeller to check and if needed replace anode.
Anode is intact with greater than %95 on anode intact.
Prop is covered in thick growth. - Clean prop and anode
Scrape off all growth from propeller and anode.
Prop anti foul is working extremely well, growth was removed fairly easily and completely.
Prop anti foul still functioning well. - Clean Rudder
Scrape and scrub off all growth from rudder - Clean aft of hull
Scrape and scrub aft section of hull down to the bottom of the keel.